coromose Holybro Kakute F7 AIO F7 Flight Controller w/ OSD BEC Current Sensor & 4 PCS 65A BLheli 32 Tekko32 F3 Metal ESC Combo for RC Drone

Description:

Model:Kakute F7 V1.5 AIO and Tekko32 F3 Metal Combo

Tekko32 F3 Metal ESC

Model: Tekko32 F3 Metal

Item Name: 65A BL_32 DShot1200 ESC

Quantity: 4 PCS

Con. Current: 65A

Peak Current: 80A

Input Voltage: 3-6S Lipo Support

Ext. cap needed for 6s (220uf 35v for 6s usage.)

- F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz

- Mosfet tested at 4S 65A, under props, nothing covered for 1min

- Onboard WS2812B LED

Size:18 x 27 mm

Weight: 4.4g/PC

Kakute F7 V1.5 AIO Flight Controller manual

Item Name: F7 V1.5 Flight Controller AIO OSD BEC and Current Sensor

MCU: STM32F745 32-bit processor

IMU: MPU6000 ( SPI)

Barometer: BMP280

Current Sensor: Approximately 130 amps maximum measurable value

USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)

6 hardware UARTS (UART1,2,3,4,6,7)

All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without uninvert .

Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.

TF card for Blackbox logging

Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)

Mounting Holes: Standard 30.5mm square to center of holes

Weight: 11.2g

Package Includes:

4x Holybro ekko32 F3 Metal ESC 65A

4x 35V 220uF Capacitor

4x 24AWG 100mm Black wire

4x 24AWG 100mm White wire

4x 24AWG 100mm Blue wire

4x 16AWG 100mm Red wire

4x 16AWG 100mm Black wire

1x Kakute F7 V1.5 Flight Controller Board

Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.